Internormen TRS 226 Returfilter - Med suction connection

Internormen returfilter
  • Tank-top mounted in-line filters with a suction connection on the clean-side
  • For hydraulic circuits which are equiped with minimum 2 feed pumps (2 hydraulic circuits)
  • Suitable for a working pressure up to 10 bar
  • Pressure peaks will be absorbed by a sufficient margin of safety
  • Directly mounted to the reservoir and connected to the return-line
  • Filter elements as fine as 5 μm(c) microns are available; finer filter elements on request
  • Can be used for petroleum-based fluids, HW emulsions, water glycols, most synthetic fluids and lubrication fluids
  • Stable elements
  • Excellent filtration capabilities
  • High dirt retaining capacity
  • Long service life
  • Easy to service.
     Internormen TRS 226 Returfilter - Med suction connection
Kontakt Hydex vedrørende Internormen TNRS 226 returfilter 

Type    Return Line Filter with Suction Connection
Temperature range -10°C to +80°C (for a short time +100°C)
Operating medium Mineral oil, other media on request
Max. operating pressure 10 bar
Opening pressure by-pass valve 2,5 bar
Opening pressure preload valve 0,5 bar
Opening pressure suction valve 0,05 bar
Connection G 1¼ according to DIN 3852, T2
Housing material Al-casting, polyamide 6
Sealing material Nitrile (NBR) or Viton (FPM), other materials on request
Installation position Vertical
Volume tank 2,8 l
Classification Pressure Equipment Directive 97/23/EC for mineral oil (fluid group 2), Article 3, Para. 3
ATEX Directive 94/9/EC according to specific application
For mer informasjon Datablad --- Oversikt --- Brosjyre

Kontakt Hydex vedrørende Internormen TNRS 226 returfilter 


Relaterte produkter

  Internormen TRS 101 Returfilter - Med suction connection         Internormen TRS 625 Returfilter - Med suction connection
 
Oversikt Internormen returfilter -Med suction connection
  
 
Page rendered: 28.12.2022 21:34:02
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)