W.E.ST. CSC-152SSIC kontroller for synkronisering

W.E.ST. kontrollere for synkronisering 
  • Communication via Profibus DP: Command values, actual values, control word and status word
  • Sensor resolution up to 0,001 mm
  • Speed resolution up to 0,005 mm/s
  • Principle of stroke depended deceleration
  • Synchronization control function: P or PT1
  • Optimal use of overlapped and zero overlapped proportional valves
  • Internal profile, defined by acceleration time, max velocity and deceleration stroke
  • Extern definable velocities
  • Simple and application orientated parameter settings
  • Failure monitoring
  • Adjustments via RS232C interface
    
Kontakt Hydex vedrørende W.E.ST. CSC-152SSIC kontroller for synkronisering 

Type    Synchronization and positioning control unit
Use Controlling hydraulic drives in synchronization
Power supply 12… 30 VDC (incl. ripple)
Current consumption <200 mA + sensor power consumption
External fuse 1 A (medium lag)
Interface RS 232C, 9600 Baud, 1 stop bit, No parity, Echo Mode
Housing Snap-On Module EN 50022
Polyamide PA 6.6
Combustibility class V0 (UL94)
Protection class IP20
Temperature range -20°C to +60°C
Humidity <90% (not condensing)
Connectors RS232: 3,5mm JISC-6560
4 x 4pol. screw terminals
PE: direct via DIN rail
For mer informasjon Klikk her  --- Datablad

Kontakt Hydex vedrørende W.E.ST. CSC-152SSIC kontroller for synkronisering


 
Page rendered: 28.12.2022 21:32:28
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)