W.E.ST. MDR-137 kontroller for trykk

W.E.ST. kontrollere for trykk
  • Analogue pressure command and feedback values
  • Special pressure control concept for pressure reducing and relief valves
  • Integrated power stage
  • Optimized PID compensator for pressure closed loop control
  • Ramps for pressure loading and unloading
  • Mode for open loop control and for closed loop control
  • Simple and application orientated parameter settings
  • Extended failure monitoring
  • Adjustments via RS232C interface
    
Kontakt Hydex vedrørende W.E.ST. MDR-137 kontroller for trykk 

Type     Pressure control module
Use Controlling pressure and force (and speed too) in hydraulic systems
Power supply 12… 30 VDC (incl. ripple)
Current consumption 60 mA + solenoid current
External fuse 3 A (fast)
Interface RS 232C, 9600 Baud, 1 stop bit, No parity, Echo Mode
Housing Snap-On Module EN 50022
Polyamide PA 6.6
Combustibility class V0 (UL94)
Protection class IP20
Temperature range -20°C to +60°C
Humidity <95% (not condensing)
Connectors RS232: 3,5mm JISC-6560
4 x 4pol. screw terminals
PE: direct via DIN rail
For mer informasjon Klikk her  --- Datablad

Kontakt Hydex vedrørende W.E.ST. MDR-137 kontroller for trykk

 
Page rendered: 28.12.2022 23:19:17
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)