| Type |
|
Portable Test Controller |
|
|
| Channels |
|
1-6 |
|
|
| Frequency range |
|
0,01-500 Hz |
|
|
| Protection rate |
|
IP30 |
|
|
| Input voltage |
|
90-132/180-264 VAC; 47-63 Hz; 10 A @ 115 V, 5 A @ 230 V, 400 VA |
|
|
| Weight |
|
9,2 kg |
|
|
| Housing |
|
Desktop or 19" rack mountable 450x177x280 mm
Integrated 640x480 full VGA color display |
|
|
| Servo controller |
|
Up to 2,4 kHz multi channel or up to 10 kHz single channel control loop
Unique MOOG control loop
Three feedback control possibilities (Force, Position, Acceleration)
Bumpless instant mode switching between force and position mode |
|
|
| Function generation |
|
Multi-channel function generation with user defined "mixer" funtions
Waveforms: Sine, sawtooth, block/square, ramp, rounded ramp, exponential
Analog input can be used as command
Complex simulation spectrum support including power spectral density
Constant amplitude and phase matching |
|
| Standard inputs (per channel) |
|
Total 2x high resolution (0,03%)
1x Pot meter or LVDT input (user selectable with Pot excitation ± 5 V 5 mA or LVDT excitation 3,35 V RMS @ 3,5 kHz)
1x LVDT input with excitation 3,35 V RMS @ 3,5 kHz
Encoder, absolute (SSI) maximum 32 bit or relative 10 bit
16 bit input (± 10V)
Acceleration, ICP acceleration input. 18 bit |
|
| Standard outputs (per channel) |
|
16 bits ± 100 mA valve driver output, with a limit in software from 0 to 100 % or (hardware selectable) ± 10 V output
2x 16 bit D/A converters, ± 10 V |
|
| Optional items |
|
Manifold control unit with 4 On/Off
Low/High pressure valves (24 VDC/2 A each)
Digital I/O board containing 8 inputs and 8 outputs
Analog I/O board containing 8 inputs and 8 outputs
Analog I/O board containing 16 inputs
Strain amplifier board (6 channels, 1/4, 1/2 and full bridge 120/350 ohm)
Accelerometer input board 6 channels
Open interface: RESTful API Moog Test Controller, SDK (for connection to MATLAB, LabVIEW, and other programming environments)
COTS EtherCat I/O modules |
|
| Typical applications |
|
Aerospace Testing
Automotive Testing
Durability and fatigue testing
Vibration, shock, performance evaluation and related testing |
|
| For mer informasjon |
|
Klikk her --- Datablad --- Katalog |
|