W.E.ST. POS-125PDP kontroller for posisjonering

W.E.ST. kontrollere for posisjonering 
  • Communication via Profibus DP: Command values, actual values, ontrol word and status word
  • Sensor resolution up to 0,001 mm
  • Speed resolution up to 0,005 mm/s
  • Principle of stroke depended deceleration
  • High / Low speed profile generation
  • PQ control function for position and force/pressure control
  • Internal profile, defined by acceleration time, max velocity and deceleration stroke
  • Simple and application orientated parameter settings
  • Failure monitoring
  • Adjustments via RS232C interface
    
Kontakt Hydex vedrørende W.E.ST. POS-125PDP kontroller for posisjonering 

Type    Universal axis control unit
Use Controlling hydraulic positioning drives via an integrated Profibus DP interface
Power supply 12...30 VDC (incl ripple)
Current consumption 400 mA + sensor power consumption
External fuse 1 A (medium lag)
Interface RS 232C, 9600 Baud, 1 stop bit, No parity, Echo Mode
Housing Snap-On Module EN 50022
Polyamide PA 6.6
Combustibility class V0 (UL94)
Protection class IP20
Temperature range -20°C to +60°C
Humidity <90% (not condensing)
Connectors RS232: 3,5mm JISC-6560
4 x 4pol. screw terminals
PE: direct via DIN rail
For mer informasjon Klikk her  --- Datablad

Kontakt Hydex vedrørende W.E.ST. POS-125PDP kontroller for posisjonering


 
Page rendered: 28.12.2022 21:33:42
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)