W.E.ST. PQ-132 kontroller for trykk

W.E.ST. kontrollere for trykk
  • Analogue q– and p-command values
  • Classical p/q controller with pressure limitation (automatic switch over)
  • Ramps for pressure up and down
  • Force- / pressure controller with one sensor
  • Differential pressure control with two pressure sensors
  • Simple and application orientated parameter settings
  • Driving of zero-overlapped control valves
  • Failure monitoring
  • Adjustments via RS232C interface
    
Kontakt Hydex vedrørende W.E.ST. PQ-132 kontroller for trykk 

Type    p/Q-controller (pressure limitation control)
Use Controlling pressure and force of hydraulic drives
Power supply 12… 30 VDC (incl. ripple)
Current consumption <100 mA
External fuse 1 A (medium lag)
Interface RS 232C, 9600 Baud, 1 stop bit, No parity, Echo Mode
Housing Snap-On Module EN 50022
Polyamide PA 6.6
Combustibility class V0 (UL94)
Protection class IP20
Temperature range -20°C to +60°C
Humidity <90% (not condensing)
Connectors RS232: 3,5mm JISC-6560
4 x 4pol. screw terminals
PE: direct via DIN rail
For mer informasjon Klikk her  --- Datablad

Kontakt Hydex vedrørende W.E.ST. PQ-132 kontroller for trykk

 
Page rendered: 28.12.2022 21:33:45
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)