A pump for process engineering
The grading of the total of 8 nominal sizes makes it easier to set the desired dosing ratios
The fine gearing with a high number of teeth guarantees a low-pulsation volume flow
For pumping a wide variety of fluids
Typical applications are found in polyurethane facilities, refrigerating machines and vacuum facilities
The magnetic coupling serves as a shaft seal and for the transmission of the torque
The outer rotor of the magnetic coupling is assembled on the engine shaft and the inner rotor is assembled directly on the pumping shaft
The magnetic coupling is used when an absolute sealing is required between the pumping room and the atmosphere
Leak-free operation is ensured when operating in closed systems with high pressure on the pump inlet side
The magnetic coupling is predestined for dispensing dangerous and health hazardous mediums

Type		Transfer Gear Pump with magnetic coupling
Mounting method		Flange fixing
Max operating pressure		120 bar
Effective displacement		0,5-4 cm³/rev
Max speed		3000 1/min
Temperature range		−10 °C ... +150 °C
Viscosity range		10...20000 mm²/s
Fluids		Adhesives, Antifreeze - Bore oils - Cutting oils - Diesel oils, Drawing compound - Emulsions - Fuel oils, L, EL, H - Gear oils, Grease - Hardening oils, Heat transfer media, - Heavy oils, Hydraulic fluids - Isocyanate - Lubricating oils, Lacquers - Motor oils - Paint, Paraffins, Plastics, Polyols - Printing inks, Processing oils - Resins, Rolling oils - Waste oils, Waxes
For mer informasjon		Datablad --- Oversikt

	Kracht KF 0 serie transportpumper/smøreoljepumper - Tannhjul - Utvendig fortanning			Kracht Durotech KP 1 serie transportpumper/smøreoljepumper - Tannhjul - Utvendig fortanning

	Kracht Durotech DT 5 serie transportpumper/smøreoljepumper - Tannhjul - Utvendig fortanning			Oversikt Kracht transportpumper/ smøreoljepumper - Tannhjul - Utvendig fortanning