W.E.ST. CSC-151 kontroller for synkronisering

W.E.ST. kontrollere for synkronisering 
  • Synchronization of two axis
  • Principle of bypass control (parallel to flow divider)
  • Safety in emergency cases by driving through the flow divider only
  • Simple and cost effective with only one proportional valve
  • Auto-Setup of the offset (no time consuming sensor adjustment)
  • Parameter for valve adaptation
  • Failure monitoring
  • Adjustments via RS232C interface
    
Kontakt Hydex vedrørende W.E.ST. CSC-151 kontroller for synkronisering 

Type    Synchronization control unit
Use Controlling hydraulic synchronization drives
Power supply 12… 30 VDC (incl. ripple)
Current consumption <100 mA
External fuse 1 A (medium lag)
Interface RS 232C, 9600 Baud, 1 stop bit, No parity, Echo Mode
Housing Snap-On Module EN 50022
Polyamide PA 6.6
Combustibility class V0 (UL94)
Protection class IP20
Temperature range -20°C to +60°C
Humidity <90% (not condensing)
Connectors RS232: 3,5mm JISC-6560
4 x 4pol. screw terminals
PE: direct via DIN rail
For mer informasjon Klikk her  --- Datablad

Kontakt Hydex vedrørende W.E.ST. CSC-151 kontroller for synkronisering

 
Page rendered: 28.12.2022 21:33:46
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)