Internormen MPS 02.1 Metallpartikkel sensor

Internormen sensorer
  • Detecting metal particles in moving hydraulic and lubricant fluids
  • Typical application areas:
    • inexpensive, continuous monitoring of large-scale gearboxes for incipient heavy wear with the increasing number of particles per time unit
    • monitoring component cleanliness e.g. on flushing test stands
        Internormen MPS 02.1 Metallpartikkel sensor
Kontakt Hydex vedrørende Internormen MPS 02.1 Metallpartikkel sensor 

Type    Metallpartikkel sensor  
Detection limit > 260 μm Fe
Max. detection rate 100 particles/s
Operating pressure ≤ 20 bar
Fluid temperature range -30°C…+85°C
Flow rate 30...110 l / min
Power supply + 24 V DC
Electrical power consumption max. 5 W
Outputs 1x signal (24 V Pulse ~ 7ms)
1 x diagnostic output (24 V, if no malfunctions)
Max. load on electric output 10 mA
Connection size SAE Flansch 1”
For mer informasjon Klikk her --- Brosjyre

Kontakt Hydex vedrørende Internormen MPS 02.1 Metallpartikkel sensor 


Relaterte produkter

  Internormen MPS 01.2 Metallpartikkel sensor         Internormen MPS 03.1 Metallpartikkel sensor
 
Internormen WSPS 05 Sensor for vannforurensing Oversikt Internormen sensorer
 
 
  
 
Page rendered: 28.12.2022 22:00:25
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)