PEES Components AN220 servo amplifier

PEES Components styringsenheter
  • The AN220 servo amplifier is suitable for controlling the most popular servo valves
  • Linear output stage with three current ranges (±20mA, ±100mA, and ±400mA)
  • One side of load at zero voltage, allows use as current driver <br>• protected against wrong polarity
  • 6 user-selectable voltage inputs (10 k /V), one ±10V input via ramp generator, one 4...20mA input, one differential input
  • Internal/external modulation limiting for positive and negative valve modulation, adjustment selectable as separate or symmetrical
  • PID controller with external disable
  • Control parameters adjustable on the front plate
  • Ramp has wide range of adjustment (0.1...10sec) and can be disabled externally
    
Kontakt Hydex vedrørende PEES Components AN220 servo amplifier

Type      Servo amplifier
Use Controlling the most popular servo valves
Connector 32 pin connector DIN 41612 D32
Supply voltage ±15V DC
Output current Imax = 400mA, 3 plug-selectable ranges: ±20mA, ±100mA, ±400mA
Control parameters P, I and D components adjustable via potentiometers
Inputs 6x user selectable 10kΩ/V
1x ±10V, 100kΩ, via ramp generator
1x 4...20mA, 100Ω
1x differential input
1x pos. limit 0...+10V
1x neg. limit 0...-10V
Dither 2 plug-selectable ranges:
J11 open: approx. 200Hz
J11 inserted: approx. 150Hz
Adjustable amplitude, approx. 0...20% of rated current
Measurement sockets (2mm) 'M1': + limit 
'M2': - limit
'M3': controller output
'M4': valve current
For mer informasjon Klikk her --- Datablad

Kontakt Hydex vedrørende PEES Components AN220 servo amplifier


 
Page rendered: 28.12.2022 22:00:38
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)